Helix
HELIX C ONE 1100W 1-Ohm Monoblock Sub High-Res Audiophile Sound Quality NEW
HELIX C ONE 1100W 1-Ohm Monoblock Sub High-Res Audiophile Sound Quality NEW
Couldn't load pickup availability
Share

HELIX C ONE
The sound power house - extremely powerful and stunning sound quality
The C ONE is a high-end 1-channel amplifier that is able to drive even powerful subwoofers to the max. The ultra low-noise and ultra low-distortion Class A driver stage feeds a total of 32 hand-selected MOSFET power transistors, resulting in an incredible damping factor of 1,000 for relentless control of every loudspeaker.
Additionally the intelligent regulation of the power supply assures stable conditions for the output stages and therefore phenomenal output power that is almost independent of the cars battery voltage. And for even more output power, two C ONE amplifiers can be combined to one single powerhouse - thanks to the TwinPower Link.
Despite its impressive output power, the C ONE is by no means a pure subwoofer amplifier. Thanks to an extended frequency response up to 80 kHz and an architecture that has been designed down to the last detail for ultimate sound quality, the C ONE is also a perfect buddy for heavy-duty mid-woofers in audiophile system concepts.
In combination with the optionally available digital input module HDM 1, the C ONE demonstrates the perfect transition to the digital era. The HDM 1 accepts digital audio signals up to 96 kHz sampling rate via its optical input followed by cutting-edge BurrBrown D/A converters with 32 Bit resolution that transform the signals back to the analog domain. Therefore the C ONE is absolutely future-proof and perfectly prepared for the combination with our digital signal processors.
Features
- Extremely powerful Class AB amplifier with up to 1,100 Watts RMS @ 1 Ohm - a perfect match for all 2 x 2 Ohms subwoofers connected in parallel
- Also usable as an ultra broadband amplifier with exceptional sound quality - ideal for High Resolution Audio
- Ultra low-noise and distortion-free power amp drivers in Class A technology
- Enormous damping factor of 1,000 @ 4 Ohms for maximum speaker control
- Optionally available HELIX Digital Input Module (HDM) to extend the amplifier with an optical digital input in SPDIF format
- Regulated DC / DC switching power supply with Start-Stop capability down to 6V supply voltage
- Microprocessor-based monitoring of amplifier status including temperature-dependent fan control
- Integrated, active crossover with highpass, lowpass, bandpass, bass boost and phase control
- TwinPower Link for connecting two amplifiers in bridged mode
- Cutting-edge BurrBrown D/A converters with 32 Bit resolution in combination with the optional HDM 1 module
- Massive 24-carat gold-plated power and speaker terminals
- Quad-layer PCB with extra-solid 70μ copper traces for lowest possible losses and SMD (Surface Mounted Device) manufacturing technology
Special features:
Start-Stop capability
The switched power supply of the HELIX C ONE assures operation even if the battery's voltage drops down to 6 Volts during engine crank.
High-Resolution audio
The extremely broadband audio bandwidth of the amplifier ensures a lossless audio reproduction of High-Resolution audio content to provide the best possible sound in studio quality.
Technical data
Output power RMS ≤ 1% THD+N Normal operation
(One amplifier)TwinPower Link
(Two amplifiers)- @ 4 Ohms 1 x 525 Watts 1 x 1,660 Watts - @ 2 Ohms 1 x 830 Watts 1 x 2,200 Watts - @ 1 Ohm 1 x 1,100 Watts - - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Up to 1,320 Watts RMS @ 1 Ohm Amplifier technology Class AB Inputs 2 x RCA / Cinch
1 x Remote In
1 x Remote control input
1 x TwinPower LinkInput sensitivity RCA / Cinch 0.5 - 8 Volts Input impedance RCA / Cinch 7.5 kOhms Input impedance highlevel - Outputs 1 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 80,000 Hz Bass boost 0 - 9 dB / 40 Hz - 120 Hz Highpass 15 Hz - 4,000 Hz adjustable Lowpass 15 Hz - 4,000 Hz adjustable Bandpass 15 Hz - 4,000 Hz adjustable Subsonic - Phase 0 - 180° adjustable Slope high- / lowpass 12 dB/Oct. Slope subsonic / lowpass - Signal-to-noise ratio digital input - Signal-to-noise ratio analog input 120 dB (A-weighted) Distortion (THD) < 0.006 % Damping factor > 1000 Operating voltage 9 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 2400 mA Operating temperature range -40 °C to +70 °C Fuse 3 x 30 A LP-Mini-fuse (APS) Additional features Active, adjustable crossover, bass boost, HDM slot, input mode switch, TwinPower Link, Start-Stop capability Dimensions (H x W x D) 37.1 x 430 x 240 mm /
1.46 x 16.93 x 9.45"* In typical applications as subwoofer amplifier
Scope of delivery
1 x High-end amplifier HELIX C ONE
2 x Allen key
1 x Mounting material
1 x Instruction manual-
- BrandHelix
- ChannelsMono
- Country of originGermany
- ModelC ONE
- Rms power1100W
- Description tagHELIX C ONE The sound power house - extremely powerful and stunning sound quality The C ONE is a high-end 1-channel amplifier that is able to drive even
- Title tagHELIX C ONE 1100W 1-Ohm Monoblock Sub High-Res Audiophile Sound
-
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
Featured Products
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title