Helix
HELIX DSP PRO MK3 High Res 10 Ch DSP + CONDUCTOR PRO Programable Remote Control
HELIX DSP PRO MK3 High Res 10 Ch DSP + CONDUCTOR PRO Programable Remote Control
Couldn't load pickup availability
Share

HELIX BUNDLE
HELIX DSP PRO MK3 High-Res 10-Channel DSP
HELIX CONDUCTOR PRO Programmable DSP Remote Control
HELIX DSP PRO MK3
The next evolutionary stage of the DSP PRO
Features- TwinDSP Power - two extremely powerful "fixed point" Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second
- State-of-the-art 32 Bit AD and DA signal converters from AKM
- ACO - Advanced 32 Bit CoProcessor platform for extended feature set
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- Proprietary TuneEQ function for automated adjustment of the output equalizers
- SFX (DSP Sound Effects) - Augmented Bass Processing, RealCenter & Co.
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Smart 8-channel highlevel input with ADEP.3 circuit
- Start-Stop capability down to 6V supply voltage
- "Ground lift" switch to avoid ground loops
- Channel pair separated, three-stage input sensitivity adjustment (highlevel up to max. 32 Volts, RCA / Cinch up to max. 4 Volts)
- Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
- Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
- Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
- Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
- Outputs: 10 x RCA/Cinch with max. 8 Volts output voltage
- Easiest configuration via the intuitive DSP PC-Tool 5 software
Technical data
Inputs 8 x RCA / Cinch
8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote InInput sensitivity RCA / Cinch 2 / 3 / 4 Volts
Highlevel 4 / 7 / 11 or 12 / 22 / 32 VoltsOutputs 10 x RCA / Cinch
1 x Remote OutOutput voltage 8 Volts Frequency response 10 Hz - 44,000 Hz DSP resolution 64 Bit DSP power 2 x 295 MHz (2.4 billion MAC operations/second) Sampling rate 96 kHz DSP type 2 x Audio signal processor Signal converters A/D: AKM Velvet Sound 32 Bit
D/A: AKM Velvet Sound 32 BitSignal-to-noise ratio digital input 116 dB (A-weighted) Signal-to-noise ratio analog input 111 dB (A-weighted) Total harmonic distortion (THD+N) digital input < 0.0005 % Total harmonic distortion (THD+N) analog input < 0.001 % IM distortion (IMD) digital input < 0.002 % IM distortion (IMD) analog input < 0.004 % Crosstalk > 90 dB Operating voltage 9.6 - 17 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 3 A max. Current draw 650 mA Max. remote output current 500 mA Additional features HEC slot, Ground lift switch, Smart Control Port, 32 Bit CoProcessor, ADEP.3 circuit, Auto Remote switch Dimensions (H x W x D) 40 x 177 x 150 mm /
1.58 x 6.97 x 5.91"
Scope of delivery1 x Signal processor HELIX DSP PRO MK3
1 x Control Input-to-SCP adaptor
1 x USB cable
1 x Mounting material
1 x Instruction manualCONDUCTOR PRO
Features
- Independent control of up to 4 individual volumes such as Master, Digital, HEC/AUX, Rear Attenuation or Subwoofer including full system mute
- Selectable volume ranges of 60 dB, 24 dB, 12 dB
- Selectable volume step size of 1 dB or 0.5 dB
- Individually configurable LED color for each volume menu
- Sound Setup switching with up to 10 presets and signal source selection
- Optional Bluetooth® module control including play, pause, track navigation and activation of pairing*
- ToneControl - flexible sound tuning for highs and lows
- Precise boost or cut in the range from −6 dB to +6 dB
- Precise boost or cut in the range from −6 dB to +6 dB
- 12 x RGB-LEDs for visual feedback
- Wide color space with over 16 million colors
- Configurable brightness and automatic dimming
- Seamless and secure installation
- Rear mounting ring and fine thread for secure fastening
- Flush mount installation with Ø 1. 58" / 40 mm hole cut-out
- 16.4 ft / 5 m cable for SCP with split connector
- No separate power supply required
- Enhanced look and feel thanks to premium materials and ergonomic design
- High-grade aluminum housing
- Ergonomic rotary knob with rubber-touch surface on the side for precise control
- Full configuration and updatability through the DSP PC-Tool software
* Supported by DSP products equipped with a Bluetooth Extension Card (Extension Card 2.0 - BT HD or HEC / MEC BT HD). The BT HD STREAMER is excluded
Technical dataHousing Aluminum housing with ergonomic rotary knob with rubber-touch surface on the side Hardware Rotary encoder, 12 x RGB-LEDs & 48 MHz ARM processor Connection SCP (Smart Control Port) / no separate power supply required Cable length 5 m total length - split into 4.8 m connection cable + 0.2 m CONDUCTOR cable Dimensions (Ø x H) Ø 46 x 36 mm / Ø 1.81 x 1.42" Installation depth 18 mm / 0.71"
Compatibility- All BRAX, HELIX and MATCH DSP devices featuring ACO platform and SCP (Smart Control Port)
- The CONDUCTOR PRO cannot be combined with another control unit
Scope of delivery
1 x Remote control CONDUCTOR PRO
1 x Mounting ring
1 x 16.4 ft / 5 m connection cable for SCP (Smart Control Port)-
- Description tagHELIX BUNDLE HELIX DSP PRO MK3 High-Res 10-Channel DSPHELIX CONDUCTOR PRO Programmable DSP Remote Control HELIX DSP PRO MK3 The next evolutionary stage of the
- Title tagHELIX DSP PRO MK3 High Res 10 Ch DSP + CONDUCTOR PRO Programable
-
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
Featured Products
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title