Helix
HELIX DSP ULTRA S High-Res 12-Ch DSP + DIRECTOR Remote + DMP + BT HD Bluetooth
HELIX DSP ULTRA S High-Res 12-Ch DSP + DIRECTOR Remote + DMP + BT HD Bluetooth
Couldn't load pickup availability
Share

HELIX BUNDLE
HELIX DSP ULTRA S Digital High-Res 12-Channel DSP
HELIX Director Touchscreen Remote Control
HELIX DMP Director Mounting Panel
HELIX HEC BT HD Bluetooth High-Def Audio StreamingHELIX DSP ULTRA S
Advanced technology, proven excellence
Features
- TwinDSP Power - two extremely powerful "fixed point" Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per second for an extensive sound customization of all processed channels:
- Eight input channels
- Eight virtual channels
- Twelve output channels
- Cutting-edge audio signal path for minimized distortion and unparalleled sound quality
- AKM Velvet Sound™ 32 Bit AD and DA signal converters
- Highest-quality operational amplifiers from the TI / BurrBrown "OPA series" with SoundPlusTM technology
- Refined design of the analog inputs for outstanding noise immunity
- Smart 8-channel highlevel input with ADEP.3 circuit
- ACO - Advanced 32 Bit CoProcessor platform for extended feature set:
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- DLC (Dynamic Loudness Control) and RTC (Remote Tone Control) for volume-dependent dynamic adjustment of highs and lows
- Proprietary TuneEQ function for automated adjustment of the input, virtual and output equalizers
- SFX (DSP Sound Effects) - Augmented Bass Processing, RealCenter & Co.
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Start-Stop capability down to 6V supply voltage
- "Ground lift" switch to avoid ground loops
- Continuous adjustment of the input sensitivity (highlevel up to max. 32 Volts, RCA / Cinch up to max. 8 Volts)
- Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
- Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
- Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
- Inputs: 8 x RCA/Cinch, 8 x Highlevel, 1 x optical SPDIF and 1 x coaxial SPDIF
- Outputs: 12 x RCA/Cinch with max. 8 Volts output voltage
- Easiest configuration via the intuitive DSP PC-Tool 5 software
Note: "The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners."
Technical data
Inputs 8 x RCA / Cinch
8 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Coax SPDIF (12 - 192 kHz)
1 x Remote InInput sensitivity RCA / Cinch 1 - 8 Volts
Highlevel 4 - 32 VoltsOutputs 12 x RCA / Cinch
1 x Remote OutOutput voltage 8 Volts Frequency response 10 Hz - 44,000 Hz DSP resolution 64 Bit DSP power 2 x 295 MHz (2.4 billion MAC operations/second) Sampling rate 96 kHz DSP type 2 x Audio signal processor Signal converters A/D: Asahi Kasei 32 Bit
D/A: Asahi Kasei 32 BitSignal-to-noise ratio digital input 117 dB (A-weighted) Signal-to-noise ratio analog input 111 dB (A-weighted) Total harmonic distortion (THD+N) digital input < 0.0004 % Total harmonic distortion (THD+N) analog input < 0.0008 % IM distortion (IMD) digital input < 0.0015 % IM distortion (IMD) analog input < 0.003 % Crosstalk > 90 dB Operating voltage 9.6 - 17 Volts (max. 5 sec. down to 6 Volts) Power rating DC 12 V ⎓ 1.1 A max. Current draw 550 mA Max. remote output current 500 mA Operating temperature range -40 °C to +70 °C Additional features HEC slot, Ground lift switch, Smart Control Port, 32 Bit CoProcessor, ADEP.3 circuit, Auto Remote switch Dimensions (H x W x D) 40 x 177 x 170 mm /
1.58 x 6.97 x 6.69"Scope of delivery
1 x Signal processor HELIX DSP ULTRA S
1 x USB cable
1 x Mounting material
1 x Instruction manualDIRECTOR - Display Remote Control
Everything under control!
With the new remote control DIRECTOR, you lead from the front!
The 2.8" / 7 cm full colour touchscreen display and the intuitive menu navigation allow easy handling of many features - for example:- Source selection
- Volume control of all sources
- Volume control of the subwoofer
- Control and configuration of the HEC BT module
- Switching between sound setups
Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processor/amplifier is hidden somewhere in the trunk.
The high-resolution, full colour touchscreen display is housed in what was solid block of aluminum.The DIRECTOR is compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher.
Features
- 2.8" / 7 cm touchscreen display and powerful ARM processor
- Easy handling of the main functions
- Volume control of all sources
- Volume control of the subwoofer
- Source selection
- Control of the HEC BT module (Bluetooth® Connect functions: pairing, reconnect, disconnect / Bluetooth® Control functions: track forward/back, play/pause)
- Switching between sound setups
- Memory locations for 20 additional sound setups (only devices without ACO platform)
- Automatic dimming function of the display
- Display rotation adjustable to 180°
- Compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher
- Exclusive solid aluminum housing
- 17' / 5.2 m connection cable included
Technical data
Dimensions (H x W x D) 53.50 x 135 x 18 mm;
2.07 x 5.32 x 0.71"Scope of delivery
1 x Remote control DIRECTOR
1 x Connection cable for Smart Control Port, 17' / 5.2 m length
1 x Instruction manualDMP
DIRECTOR mounting panel is made from an ABS plastic with a refined, black soft touch finish.
This ensures a safe, flush finish that allows the Director to blend into your cars interior.Features
- Material: ABS with black soft touch finish
- Mounting screws for fixing the DIRECTOR to the mounting panel are included in delivery
Scope of delivery
1 x Mounting panel DMP
1 x Mounting screws for fixing the DIRECTORHELIX HEC BT HD
Wireless audio streaming in HD quality via Bluetooth®
The extension card BT HD extends your HELIX device with a Bluetooth® audio streaming function in HD quality with up to 576 kbps and 24 Bit/48 kHz sampling rate thanks to BT5.0+EDR standard. The module supports the SBC, AAC, aptX & aptX HD audio codec. Additionally, the module is equipped with an optical digital output in SPDIF format.
High Definition audio
Thanks to the support of the Qualcomm® aptX™ HD audio codec, wireless and constant audio transmission in HD quality is possible. Furthermore, the direct signal transmission of the digital signals from the BT HD module to the DSP without additional AD-DA conversion allows lossless audio processing and thus outstanding sound performance.
Full control
The HEC BT HD supports control commands like play/pause, track forward/back, connect, pairing and disconnect of a connected DSP remote control (e.g. CONDUCTOR and DIRECTOR). The DIRECTOR's display also shows you the current artist & title as well as the currently used audio codec.
Wireless DSP tuning
The increased data transmission of the BT5.0 standard in combination with the DSP PC-Tool software V5 (coming in beginning of 2022) and a PC with Bluetooth® wireless technology allows wireless configuration of all DSP devices with ACO platform. A cumbersome connection via USB cable is now a thing of the past.
Everything included
For seamless installation, a device-specific side panel and a high-quality antenna for maximum transmission quality are, of course, included in the scope of delivery.
Note: Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.Features
- Bluetooth® audio streaming powered with Qualcomm® aptX™ HD audio codec
- High Definition audio transmission with up to 576 kbps and 24 Bit/48 kHz sampling rate thanks to BT5.0+EDR standard
- Supported Audio Codecs: SBC, AAC, aptX & aptX HD
- Direct digital signal transmission to DSP for lossless audio processing
- Enables wireless tuning of the DSP via the DSP PC-Tool 5 software for all DSP devices with ACO platform
- Supports the artist & title displaying function of the DIRECTOR display remote control (only ACO devices / from DIRECTOR software version 2.10)
- Supports control commands like play/pause, track forward/back, connecting, pairing and disconnecting the connected DSP remote control (e.g. CONDUCTOR and DIRECTOR) as well as display of the currently used audio codec
- Additional optical output in SPDIF format
- Including device-specific side panel
Technical data
Bluetooth® standard
5.0 + EDR
Bluetooth® profile
A2DP, AVRCP, SPP
Bluetooth® codec
SBC, AAC, Qualcomm® aptX™ and Qualcomm® aptX™ HD
Number of paired devices
8
Wireless frequency range
2402 ~ 2480 MHz
Range
Up to 10 m
Digital optical output
SPDIF with either 96 kHz / 24 Bit or 48 kHz / 24 Bit depending on sampling rate of the device
Compatibility
- HELIX DSP MINI MK2
Scope of delivery
1 x HEC BT HD module
1 x Device-specific side panel
1 x Antenna
1 x Instruction manual-
- BrandHelix
- Country of originGermany
- ModelDSP ULTRA S
- TypeCrossover, Equalizer, High Pass Filter, Low Pass Filter, Signal Processor
- Description tagHELIX BUNDLE HELIX DSP ULTRA S Digital High-Res 12-Channel DSPHELIX Director Touchscreen Remote ControlHELIX DMP Director Mounting PanelHELIX HEC BT HD
- Title tagHELIX DSP ULTRA S High-Res 12-Ch DSP + DIRECTOR Remote + DMP + BT HD
-
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
Featured Products
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title