Helix
HELIX V TWELVE DSP MK2 12 x 75w Amplifier 14-Ch DSP + DIRECTOR Remote + DMP
HELIX V TWELVE DSP MK2 12 x 75w Amplifier 14-Ch DSP + DIRECTOR Remote + DMP
Couldn't load pickup availability
Share

HELIX BUNDLE
HELIX NEXT V TWELVE DSP MK2 12 x 75w RMS 14-Ch DSP
HELIX Director Touchscreen Remote Control
HELIX DMP Director Mounting Panel
HELIX V TWELVE DSP MK2
Features
- Up to 160 W RMS output power per channel into 2 Ω
- "Pure Class GD" concept for outstanding sound quality combined with best possible efficiency
- Extremely powerful 64 Bit "fixed point" Audio DSP
- A/D and D/A signal converters from BurrBrown
- ACO - Advanced 32 Bit CoProcessor platform for system and DSP features like:
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- SFX sound effects - Augmented Bass Processing, StageXpander, RealCenter & Co.
- 10 internal memory locations for sound setups
- High power 12-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuit
- Two processed RCA / Cinch outputs
- 1:1 IOR (Input-to-Output Routing) - same number of highlevel inputs and amplifier outputs
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Automatic Remote switch
- Start-Stop capability down to 6 Volt supply voltage
- Compact design with low heat dissipation thanks to extraordinary efficiency
Technical data
Power RMS ≤ 1% THD+N - @ 4 Ohms 12 x 75 Watts - @ 2 Ohms 12 x 120 Watts - @ 1 Ohm - - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Up to 160 Watts RMS @ 2 Ohms Amplifier technology Pure Class GD Inputs 6 x RCA / Cinch
12 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote InInput sensitivity RCA / Cinch: max. 4 V or max. 8 V
Highlevel: max. 16 V or max. 32 VInput impedance RCA / Cinch 12 kOhms Input impedance highlevel 9 - 33 Ohms or 20 kOhms Outputs 12 x Speaker output
2 x RCA / Cinch
2 x Remote OutOutput voltage RCA / Cinch 3 Volts Frequency response 20 Hz - 22,000 Hz DSP resolution 64 Bit DSP power 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type Audio signal processor Signal converters A/D: BurrBrown 24 Bit
D/A: BurrBrown 24 BitSignal-to-noise ratio digital input 107 dB (A-weighted) Signal-to-noise ration analog input 102 dB (A-weighted) Distortion (THD) < 0.015 % Damping factor > 70 Operating voltage 10.5 - 18 Volts (max. 5 sec.down to 6 Volts) Power rating DC 12 V ⎓ 80 A max. Idle current 700 mA Max. remote output current 500 mA Operating temperature range -40 °C to +70 °C Fuse 2 x 30 A LP-Mini-fuse (APS) Additional features HEC slot, ADEP.3 circuit, Smart Control Port, Auto Remote switch, 32 Bit CoProcessor Dimensions (H x W x D) 44 x 220 x 220 mm /
1.73 x 8.66 x 8.66"* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)
Scope of delivery
1 x Amplifier HELIX V TWELVE DSP MK2
1 x Control Input-to-SCP adaptor
1 x USB cable
2 x Allen key
1 x Mounting material
1 x Instruction manualDIRECTOR - Display Remote Control
Everything under control!
With the new remote control DIRECTOR, you lead from the front!
The 2.8" / 7 cm full colour touchscreen display and the intuitive menu navigation allow easy handling of many features - for example:- Source selection
- Volume control of all sources
- Volume control of the subwoofer
- Control and configuration of the HEC BT module
- Switching between sound setups
Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processor/amplifier is hidden somewhere in the trunk.
The high-resolution, full colour touchscreen display is housed in what was solid block of aluminum.The DIRECTOR is compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher.
Features
- 2.8" / 7 cm touchscreen display and powerful ARM processor
- Easy handling of the main functions
- Volume control of all sources
- Volume control of the subwoofer
- Source selection
- Control of the HEC BT module (Bluetooth® Connect functions: pairing, reconnect, disconnect / Bluetooth® Control functions: track forward/back, play/pause)
- Switching between sound setups
- Memory locations for 20 additional sound setups (only devices without ACO platform)
- Automatic dimming function of the display
- Display rotation adjustable to 180°
- Compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher
- Exclusive solid aluminum housing
- 17' / 5.2 m connection cable included
Technical data
Dimensions (H x W x D) 53.50 x 135 x 18 mm;
2.07 x 5.32 x 0.71"Scope of delivery
1 x Remote control DIRECTOR
1 x Connection cable for Control Input, 17' / 5.2 m length
1 x Instruction manualDMP
DIRECTOR mounting panel is made from an ABS plastic with a refined, black soft touch finish.
This ensures a safe, flush finish that allows the Director to blend into your cars interior.Features
- Material: ABS with black soft touch finish
- Mounting screws for fixing the DIRECTOR to the mounting panel are included in delivery
Scope of delivery
1 x Mounting panel DMP
1 x Mounting screws for fixing the DIRECTOR-
- BrandHelix
- Channels12
- Country of originGermany
- ModelV TWELVE DSP MK2
- Rms power900W
- Description tagHELIX BUNDLE HELIX NEXT V TWELVE DSP MK2 12 x 75w RMS 14-Ch DSP HELIX Director Touchscreen Remote ControlHELIX DMP Director Mounting Panel HELIX V TWELVE DSP
- Title tagHELIX V TWELVE DSP MK2 12 x 75w Amplifier 14-Ch DSP + DIRECTOR Remote
-
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
Featured Products
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title