Helix
HELIX V TWELVE DSP MK2 12x75w Amplifier 14 Ch DSP + CONDUCTOR PRO Remote Control
HELIX V TWELVE DSP MK2 12x75w Amplifier 14 Ch DSP + CONDUCTOR PRO Remote Control
Couldn't load pickup availability
Share

HELIX BUNDLE
HELIX NEXT V TWELVE DSP MK2 12 x 75w RMS 14-Ch DSP
HELIX CONDUCTOR PRO Programmable DSP Remote Control
HELIX V TWELVE DSP MK2
Features
- Up to 160 W RMS output power per channel into 2 Ω
- "Pure Class GD" concept for outstanding sound quality combined with best possible efficiency
- Extremely powerful 64 Bit "fixed point" Audio DSP
- A/D and D/A signal converters from BurrBrown
- ACO - Advanced 32 Bit CoProcessor platform for system and DSP features like:
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- SFX sound effects - Augmented Bass Processing, StageXpander, RealCenter & Co.
- 10 internal memory locations for sound setups
- High power 12-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuit
- Two processed RCA / Cinch outputs
- 1:1 IOR (Input-to-Output Routing) - same number of highlevel inputs and amplifier outputs
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Automatic Remote switch
- Start-Stop capability down to 6 Volt supply voltage
- Compact design with low heat dissipation thanks to extraordinary efficiency
Technical data
Power RMS ≤ 1% THD+N - @ 4 Ohms 12 x 75 Watts - @ 2 Ohms 12 x 120 Watts - @ 1 Ohm - - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Up to 160 Watts RMS @ 2 Ohms Amplifier technology Pure Class GD Inputs 6 x RCA / Cinch
12 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote InInput sensitivity RCA / Cinch: max. 4 V or max. 8 V
Highlevel: max. 16 V or max. 32 VInput impedance RCA / Cinch 12 kOhms Input impedance highlevel 9 - 33 Ohms or 20 kOhms Outputs 12 x Speaker output
2 x RCA / Cinch
2 x Remote OutOutput voltage RCA / Cinch 3 Volts Frequency response 20 Hz - 22,000 Hz DSP resolution 64 Bit DSP power 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type Audio signal processor Signal converters A/D: BurrBrown 24 Bit
D/A: BurrBrown 24 BitSignal-to-noise ratio digital input 107 dB (A-weighted) Signal-to-noise ration analog input 102 dB (A-weighted) Distortion (THD) < 0.015 % Damping factor > 70 Operating voltage 10.5 - 18 Volts (max. 5 sec.down to 6 Volts) Power rating DC 12 V ⎓ 80 A max. Idle current 700 mA Max. remote output current 500 mA Operating temperature range -40 °C to +70 °C Fuse 2 x 30 A LP-Mini-fuse (APS) Additional features HEC slot, ADEP.3 circuit, Smart Control Port, Auto Remote switch, 32 Bit CoProcessor Dimensions (H x W x D) 44 x 220 x 220 mm /
1.73 x 8.66 x 8.66"* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)
Scope of delivery1 x Amplifier HELIX V TWELVE DSP MK2
1 x Control Input-to-SCP adaptor
1 x USB cable
2 x Allen key
1 x Mounting material
1 x Instruction manualCONDUCTOR PRO
Features
- Independent control of up to 4 individual volumes such as Master, Digital, HEC/AUX, Rear Attenuation or Subwoofer including full system mute
- Selectable volume ranges of 60 dB, 24 dB, 12 dB
- Selectable volume step size of 1 dB or 0.5 dB
- Individually configurable LED color for each volume menu
- Sound Setup switching with up to 10 presets and signal source selection
- Optional Bluetooth® module control including play, pause, track navigation and activation of pairing*
- ToneControl - flexible sound tuning for highs and lows
- Precise boost or cut in the range from −6 dB to +6 dB
- Precise boost or cut in the range from −6 dB to +6 dB
- 12 x RGB-LEDs for visual feedback
- Wide color space with over 16 million colors
- Configurable brightness and automatic dimming
- Seamless and secure installation
- Rear mounting ring and fine thread for secure fastening
- Flush mount installation with Ø 1. 58" / 40 mm hole cut-out
- 16.4 ft / 5 m cable for SCP with split connector
- No separate power supply required
- Enhanced look and feel thanks to premium materials and ergonomic design
- High-grade aluminum housing
- Ergonomic rotary knob with rubber-touch surface on the side for precise control
- Full configuration and updatability through the DSP PC-Tool software
* Supported by DSP products equipped with a Bluetooth Extension Card (Extension Card 2.0 - BT HD or HEC / MEC BT HD). The BT HD STREAMER is excluded
Technical dataHousing Aluminum housing with ergonomic rotary knob with rubber-touch surface on the side Hardware Rotary encoder, 12 x RGB-LEDs & 48 MHz ARM processor Connection SCP (Smart Control Port) / no separate power supply required Cable length 5 m total length - split into 4.8 m connection cable + 0.2 m CONDUCTOR cable Dimensions (Ø x H) Ø 46 x 36 mm / Ø 1.81 x 1.42" Installation depth 18 mm / 0.71"
Compatibility- All BRAX, HELIX and MATCH DSP devices featuring ACO platform and SCP (Smart Control Port)
- The CONDUCTOR PRO cannot be combined with another control unit
Scope of delivery
1 x Remote control CONDUCTOR PRO
1 x Mounting ring
1 x 16.4 ft / 5 m connection cable for SCP (Smart Control Port)-
- Description tagHELIX BUNDLE HELIX NEXT V TWELVE DSP MK2 12 x 75w RMS 14-Ch DSP HELIX CONDUCTOR PRO Programmable DSP Remote Control HELIX V TWELVE DSP MK2 Features Up to 160 W
- Title tagHELIX V TWELVE DSP MK2 12x75w Amplifier 14 Ch DSP + CONDUCTOR PRO
-
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
Featured Products
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title