Helix
HELIX V TWELVE DSP MK2 12x75w Amplifier 14-Ch DSP + CONDUCTOR Remote Control
HELIX V TWELVE DSP MK2 12x75w Amplifier 14-Ch DSP + CONDUCTOR Remote Control
Couldn't load pickup availability
Share

HELIX BUNDLE
HELIX NEXT V TWELVE DSP MK2 12 x 75w RMS 14-Ch DSP
HELIX Conductor Programmable DSP Remote Control
HELIX V TWELVE DSP MK2
Features
- Up to 160 W RMS output power per channel into 2 Ω
- "Pure Class GD" concept for outstanding sound quality combined with best possible efficiency
- Extremely powerful 64 Bit "fixed point" Audio DSP
- A/D and D/A signal converters from BurrBrown
- ACO - Advanced 32 Bit CoProcessor platform for system and DSP features like:
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- SFX sound effects - Augmented Bass Processing, StageXpander, RealCenter & Co.
- 10 internal memory locations for sound setups
- High power 12-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuit
- Two processed RCA / Cinch outputs
- 1:1 IOR (Input-to-Output Routing) - same number of highlevel inputs and amplifier outputs
- VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
- Compact, future-proof SCP (Smart Control Port) for connecting remote controls and accessories
- HEC slot for system add-ons like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
- Automatic Remote switch
- Start-Stop capability down to 6 Volt supply voltage
- Compact design with low heat dissipation thanks to extraordinary efficiency
Technical data
Power RMS ≤ 1% THD+N - @ 4 Ohms 12 x 75 Watts - @ 2 Ohms 12 x 120 Watts - @ 1 Ohm - - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Up to 160 Watts RMS @ 2 Ohms Amplifier technology Pure Class GD Inputs 6 x RCA / Cinch
12 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote InInput sensitivity RCA / Cinch: max. 4 V or max. 8 V
Highlevel: max. 16 V or max. 32 VInput impedance RCA / Cinch 12 kOhms Input impedance highlevel 9 - 33 Ohms or 20 kOhms Outputs 12 x Speaker output
2 x RCA / Cinch
2 x Remote OutOutput voltage RCA / Cinch 3 Volts Frequency response 20 Hz - 22,000 Hz DSP resolution 64 Bit DSP power 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type Audio signal processor Signal converters A/D: BurrBrown 24 Bit
D/A: BurrBrown 24 BitSignal-to-noise ratio digital input 107 dB (A-weighted) Signal-to-noise ration analog input 102 dB (A-weighted) Distortion (THD) < 0.015 % Damping factor > 70 Operating voltage 10.5 - 18 Volts (max. 5 sec.down to 6 Volts) Power rating DC 12 V ⎓ 80 A max. Idle current 700 mA Max. remote output current 500 mA Operating temperature range -40 °C to +70 °C Fuse 2 x 30 A LP-Mini-fuse (APS) Additional features HEC slot, ADEP.3 circuit, Smart Control Port, Auto Remote switch, 32 Bit CoProcessor Dimensions (H x W x D) 44 x 220 x 220 mm /
1.73 x 8.66 x 8.66"* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)
Scope of delivery
1 x Amplifier HELIX V TWELVE DSP MK2
1 x Control Input-to-SCP adaptor
1 x USB cable
2 x Allen key
1 x Mounting material
1 x Instruction manualCONDUCTOR
One-touch remote control
The CONDUCTOR combines design and functionality in perfection. With just one knob you have all important functions of your (DSPs) sound system fully under control - from volume adjustment, signal source selection and setup change up to the control of an optionally installed Bluetooth HD Extension Card.
Tailor-made for your needs
The CONDUCTOR can always be optimally adapted to your needs - whether as a simple subwoofer remote or as a control unit for complex system configurations. For example, two playback zones with different volumes: music for the parents in the front and a radio play for the children in the back.
All signal sources under control
With the CONDUCTOR you can manage all your connected signal sources in no time at all. For example, use your smartphone as a digital media source and intuitively control its playback (play / pause, track forward / back) and volume in combination with the optional Bluetooth Extension Card.
Sound setup switching to match your taste
Manage different sound profiles on your DSP - depending on your personal taste and demands - and enjoy your music with consistently optimized sound quality.
Seamless integration
Thanks to its compact, fully symmetrical design and high-quality materials, the CONDUCTOR can be integrated almost seamlessly into the existing vehicle interior and blends in with its appearance as inconspicuously as an original part.
Features
- Independent control of up to 4 individual volumes such as Master, Digital, HEC/AUX, Rear Attenuation or Subwoofer including full system mute
- Selectable volume ranges of 60 dB, 24 dB, 12 dB
- Selectable volume step size of 1 dB or 0.5 dB
- Individually configurable LED color for each volume menu
- Optional Bluetooth® module control including play, pause, track navigation and activation of pairing*
- 12 x RGB-LEDs for visual feedback
- Wide color space with over 16 million colors
- Configurable brightness and automatic dimming
- Easy installation
- Flush mount installation with Ø 1. 58" / 40 mm hole cut-out
- 16.4 ft / 5 m cable for SCP with split connector
- No separate power supply required
- Sound Setup switching with up to 10 presets and signal source selection
- Full configuration and updatability through the DSP PC-Tool software
* Supported by DSP products equipped with a Bluetooth Extension Card (Extension Card 2.0 - BT HD or HEC / MEC BT HD). The BT HD STREAMER is excluded
Technical data
CONDUCTOR for SCP Housing ABS housing with machined aluminum knob Hardware Rotary encoder, 12 x RGB-LEDs & 48 MHz ARM processorr Connection Single connector supply through NanoFit Cable length 5 m total length - split into 4.8 m connection cable + 0.2 m CONDUCTOR cable
Dimensions (Ø x H) Ø 46 x 28.7 mm / Ø 1.81 x 1.13"
Installation depth 17 mm / 0.67"
Scope of delivery
1 x Remote control CONDUCTOR
1 x 4.80 m connection cable for Control Input-
- BrandHelix
- Country of originGermany
- ModelV TWELVE DSP MK2
- TypeAmplifier
- Description tagHELIX BUNDLE HELIX NEXT V TWELVE DSP MK2 12 x 75w RMS 14-Ch DSP HELIX Conductor Programmable DSP Remote Control HELIX V TWELVE DSP MK2 Features Up to 160 W RMS
- Title tagHELIX V TWELVE DSP MK2 12x75w Amplifier 14-Ch DSP + CONDUCTOR Remote
-
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
Featured Products
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title