Hertz CPK 165 PRO Cento Series 6-1/2" Component Speaker System

The Hertzaudio Cento Pro CPK 165 PRO car audio system includes the CP 165 woofer and the CP 25 tweeter with Tetolon dome and 25 mm voice coil, features ensuring a very wide and linear frequency response. The CP 25 employs the "Center Tuning Duct" technology: the tunnel at the center of the powerful Neodymium magnetic circuit, ensures low-temperature air exchange between the dome and the rear loading chamber, perfectly tuning the acoustics. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.

The sophisticated design of the mobile group and suspensions of the CP 165 woofer, featuring a 60Hz calibrated resonance frequency, ensures a medium-low power with excellent punch, making listening to rich low frequency genres a unique experience. The basket is consistent with the family-feeling of the Mille line with the addition of damping and protective rubber. The cone material is inherited from the Mille Pro, as well as the suspension butyl rubber and the Tetolon fiber of the tweeter dome. These materials have excellent damping and lightness characteristics, producing a balanced sound without resonance peaks. The gift box includes the woofers grilles made of a combination of metallic mesh and high resistance ABS plastic frame. The combination of these two elements allows the user to customize the installation with a sophisticated and elegant design.

Specifications:

• Component system includes two woofers, two tweeters, and two external crossovers
• 6-1/2" pressed paper woofer with butyl rubber surround
• 1-1/8" Tetolon dome tweeter
• Power Handling:
• Peak: 315 watts per set / 160 watts each side
• RMS: 105 watts per set / 55 watts each side
• External crossover
• Frequency range: 45-22,500 Hz
• Sensitivity: 92.5 dB
• Top-mount depth: 2-5/8"
• Impedance: 4 ohms
• Grilles included

What's in the Box:

• Two CP 165 Woofers
• Two CP 25 Dome tweeters (with attached 10" length of speaker wire)
• Two CPCX 2 Crossover networks
• 2 Tweeter flush mount trim rings
• 2 Tweeter flush mount clamps
• 2 Angled surface mount housings
• 2 OEM tweeter mounting brackets
• 2 Tweeter grilles (installed)
• 2 Woofer grilles
• Grille putty
• Eight 3/4" Screws (large head)
• Eight 3/4" Screws (small head)
• Four 1/2" Flat head screws
• 8 Large speed clips
• 4 Small speed clips
• Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 25 Others)
• Templates on box