1 5

JL Audio

JL Audio C7-350CM C7 Series 3.5" 9cm Car Component Midrange Speaker 100w RMS Ea

JL Audio C7-350CM C7 Series 3.5" 9cm Car Component Midrange Speaker 100w RMS Ea

$579.00
$579.00
$649.00 (11% off)
11% OFF Sold out
View full details

  • C7-350cm

    3.5-inch (90 mm) Component Midrange, Single

     

    3.5-inch (90 mm) Component Midrange, with Grille

     

    C7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing.

     

    The C7-350cm component midrange is designed to operate in a 3-way system, with a woofer and tweeter. Conceived and purpose-built from the ground up, it offers exceptional transient response and outstanding linearity, resulting in unsurpassed clarity and natural mid-range reproduction. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviors.

     

    Passive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance.

     

    C7-350cm Design Notes:

     

    Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A concave dust cap further improves high frequency behavior.

     

    Suspension design: The moving assembly is suspended and damped via a linear profile spider formed from a Nomex®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting excursion.

     

    Motor Design: The C7-350cm employs a high-density magnetic circuit with a high-grade, neodymium magnet, and a specially machined, U-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver's performance range.

     

    A 36 mm (1.42 inch) diameter, overhung voice coil is employed, wound with copper-clad aluminum wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels.

     

    Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area.

     

    Design Bandwidth:

     

    With 48 dB/octave filters: 300 Hz - 10 kHz

     

    With 24 dB/octave filters: 400 Hz - 10 kHz

     

    With 12 dB/octave filters: 500 Hz - 10 kHz

     

    Built in USA with Global Components

     

    Sold individually, with a cast-alloy grille tray, one fine mesh steel grille insert and one spiral steel grille insert.

     

    Specification

     

    Part Number: C7-350CM

    • Continuous Power Handling (RMS)    100 W
    • Peak Music Power    200 W
    • Recommended Amplifier Power (RMS)    50 - 150 W / Ch.
    • Nominal Impedance    4 Ω
    • Frequency Response    300 Hz - 10 KHz ± 3 dB

     

    What's Included

     

    2 Year Warranty

    • C7-350cm
    • Trim ring
    • Fine mesh grille
    • Spiral grille
    • Four 1-1/4" Screws
    • 1 Crimp-on 0.187" Female quick slide (16-14 Gauge)
    • 1 Crimp-on 0.110" Female quick slide (16-14 Gauge)
    • Brand
      JL Audio
    • Country of origin
      United States
    • Model
      C7-350CM
    • Rms power
      100W
    • Speaker size
      3.5in.
    • Type
      Mid-Range Speaker(s)
    • Description tag
      C7-350cm 3.5-inch (90 mm) Component Midrange, Single 3.5-inch (90 mm) Component Midrange, with Grille C7 is the pinnacle of JL Audio automotive loudspeaker
    • Title tag
      JL Audio C7-350CM C7 Series 3.5" 9cm Car Component Midrange Speaker

  • Satisfaction Guaranteed


    If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories.  We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged. 

    Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours. 

    If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable).  We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.

     

    Return/Exchange Process


    To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number.  Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.

Featured Products

Free US shipping

available on all orders as standard

Learn More