JL Audio
JL Audio XD700/5 v2 XD Series 5 Channel Class D Amplifier 4 x 100w + 300w RMS
JL Audio XD700/5 v2 XD Series 5 Channel Class D Amplifier 4 x 100w + 300w RMS
Couldn't load pickup availability
Share

JL Audio XD700/5v2
5-Channel Class D System Amplifier, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V
The XD700/5v2 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any vehicle. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.
The XD700/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.
The XD700/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
The XD400/4v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
Specification
Part Number: XD700/5v2
Rated Continuous (RMS) Power @ 14.4 V
- Main Channels @ 4 Ω 75 W RMS x 4
- Main Channels @ 2 Ω 100 W RMS x 4
- Main Channels - Bridged @ 4Ω 200 W RMS x 2
- Subwoofer Channel @ 4 Ω 180 W RMS x 1
- Subwoofer Channel @ 3 Ω 240 W RMS x 1
- Subwoofer Channel @ 2 Ω 300 W RMS x 1
- Subwoofer Channel @ 1.5 Ω N/A
Rated Continuous (RMS) Power @ 12.5 V
- Main Channels @ 4 Ω 60 W RMS x 4
- Main Channels @ 2 Ω 90 W RMS x 4
- Main Channels - Bridged @ 4Ω 180 W RMS x 2
- Subwoofer Channel @ 4 Ω 180 W RMS x 1
- Subwoofer Channel @ 3 Ω 240 W RMS x 1
- Subwoofer Channel @ 2 Ω 300 W RMS x 1
- Subwoofer Channel @ 1.5 Ω N/A
General Specifications
- Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB)
- Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω >150 / 50 Hz
- Damping Factor @ 2 Ω >75 / 50 Hz
- THD+N @ Rated Power (Main Channels) <1% @ 2 Ω per Ch.
- THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
- Min.Copper Power / Ground Wire Gauge 4 AWG wire
- Fuse Rating 60 A (AFS, AGU or MaxiFuse™)
Signal Processing
- Filter Mode(s): Channels 1 & 2 (front) High-Pass only
- Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave
- Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz
- Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass
- Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave
- Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz
- Filter Mode(s): Subwoofer Channel Low-Pass only
- Filter Slope(s): Subwoofer Channel 12/24 dB/octave
- Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometers Yes
- Filter Defeat Function Yes
- Infrasonic Filter: Subwoofer Channel none
- Remote Level Control Optional (HD-RLC)
- Remote Level Modes Sub Ch. or All Channels
- Channel Input Mode Switch Yes (2/4/6 ch.)
- Pass-Through Preamp Output None
- Source Channel Selection for PreOuts N/A
What's Included
2 Year Warranty
- XD700/5v2
-
- BrandJL Audio
- Channels5
- Country of originUnited States
- ModelXD700/5 v2
- Rms power700W
- Description tagJL Audio XD700/5v2 5-Channel Class D System Amplifier, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V The XD700/5v2 is ideal for a complete audiophile-grade
- Title tagJL Audio XD700/5 v2 XD Series 5 Channel Class D Amplifier 4 x 100w +
-
Satisfaction Guaranteed
If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories. We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged.Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours.
If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable). We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.
Return/Exchange Process
To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number. Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.
Featured Products
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title
Example product title