1 3

Match

Match M 2.1 AMP Micro Compact Amplifier 2x210w 4-Ohm Stereo 430w 2-Ohm Mono RMS

Match M 2.1 AMP Micro Compact Amplifier 2x210w 4-Ohm Stereo 430w 2-Ohm Mono RMS

$549.00
Sale Sold out
View full details

  • MATCH M 2.1AMP

    The M 2.1AMP is the ultimate compact powerhouse for 1-channel or 2-channel applications with limited installation space.

    Excellent sound quality combined with maximum efficiency

    The M 2.1AMP is the ultimate compact powerhouse for 1-channel or 2-channel applications with limited installation space. Whether as a 2 Ohms stable mono subwoofer amplifier or even as a particularly potent stereo amp for driving passive component systems or power-hungry woofers - despite its minimalist dimensions this highly efficient performer delivers up to 700 W output power. These amazing figures in such a tiny space result from Audiotec Fischers proprietary Class HD-technology, which guarantees an unrivaled efficiency and therefore minimum heat dissipation.

    Power on demand

    The switchable mono / stereo operation makes the M 2.1AMP a multifunctional tool.

    In mono mode, it is ideal for driving powerful subwoofers with a minimum impedance of 2 Ohms - in stereo mode, it is the perfect choice for driving powerful front or rear speaker systems.

    Thanks to its High-Res audio bandwidth the M 2.1AMP is a giant in sound performance and leaves nothing to be desired.

    Maximum flexibility in a minimum of space

    In modern vehicles, the space available for sound upgrades is becoming increasingly limited and presents new challenges to installers especially with multi-device setups.Thanks to their minimal dimensions, MATCH micro amplifiers like the M 2.1 AMP can be mounted even in the most difficult space conditions and open up new, unimagined possibilities in the choice of installation location and therefore allow stealth installation concepts.

    • Ultra efficient Class HD amplifier with exceptional power-to-size ratio
    • Mono Mode: 1 x 350 Watts RMS @ 2 Ohms - Perfect to run powerful subwoofers with 2 Ohms single voice coil (SVC2) or 4 Ohms dual voice-coil (DVC4)
    • Stereo Mode: 2 x 170 Watts RMS @ 4 Ohms - Perfect to run powerful front / rear speaker systems or powerful front / under-seat subwoofers with 4 Ohms single voice coil (SVC4)
    • Small size for hidden installation concepts
    • Excellent sound quality combined with a max. signal-to-noise ratio of 108 dB and a THD of < 0.02 %
    • 2-channel RCA / Cinch input
    • "Ground Input" switch to avoid ground loops
    • Perfect combination with MATCH UPGRADE DSP amplifiers

    Mono / stereo mode

    The M 2.1AMP amplifier is equipped with a mono / stereo mode. This enables the amplifier to be configured as a 2-ohm-capable mono amplifier or as a 4-ohm-capable 2-channel amplifier, depending on the application. In both operating modes, the M2.1 AMP delivers, thanks to its HiRes capability, an extended audio frequency response of over 40 kHz for unsurpassed sound quality.

    Class HD technology

    The M 2.1AMP combines the advantages of a Class H technology with the principle of a class D amplifier. The result is an unsurpassed efficiency which easily outperforms any conventional Class D amplifier. By varying the internal supply voltage depending on the amplifier's amplitude of the input signals, idle losses are significantly reduced and overall efficiency is close to maximum at any time.

    Start-Stop capability

    The switched power supply of the MATCH M 2.1AMP assures a constant internal supply voltage even if the battery's voltage drops to 6 Volts during engine crank.

    Specification

    Part Number: M 2.1AMP

    • Power RMS    Mono Mode    Stereo Mode
    • - @ 4 Ohms    1 x 210 Watts    2 x 170 Watts
    • - @ 2 Ohms    1 x 350 Watts    -
    • - @ 1 Ohm    -    -
    • - bridged @ 4 Ohms    -    -
    • - bridged @ 2 Ohms    -    -
    • Max. output power (Mono Mode)
    • Up to 430 Watts RMS @ 2 Ohms
    • Amplifier technology    Class HD
    • Inputs    2 x RCA / Cinch
    • 1 x Remote In
    • Input sensitivity    RCA / Cinch 1 - 6 Volts
    • Input impedance RCA / Cinch    10 kOhms
    • Input impedance highlevel    -
    • Outputs    2 x Speaker output
    • 1 x Remote Out
    • Output voltage RCA / Cinch    - 
    • Signal converter for digital input    - 
    • Frequency response    10 Hz - 40,000 Hz
    • Bass boost    - 
    • Highpass    - 
    • Lowpass    - 
    • Bandpass    - 
    • Subsonic    - 
    • Phase    - 
    • Slope high- / lowpass    - 
    • Slope subsonic / lowpass    - 
    • Signal-to-noise ratio digital input    - 
    • Signal-to-noise ratio analog input    108 dB (A-weighted)
    • Distortion (THD)    < 0.02 %
    • Damping factor    100
    • Operating voltage    10.5 - 17 Volts (max. 5 Sec. down to 6 Volts)
    • Idle current    500 mA
    • Fuse    1 x 30 A LP-Mini-fuse (APS)
    • Power rating    DC 12 V ⎓ 40 A max.
    • Additional features    Variable input sensitivity, fully stabilized internal power supply, Start-Stop capability, ground switch, mono / stereo mode
    • Dimensions (H x W x D)    
    • 35 x 85 x 110 mm /
    • 1.34 x 3.35 x 4.33"
    • * In typical applications as subwoofer amplifier

    What's Included

    2 Year Warranty

    • MATCH micro amplifier M 2.1AMP
    • Line Input-to-RCA / Cinch adaptor
    • Mounting material
    • Instruction manual
    • Brand
      Audiotec-Fischer
    • Channels
      2
    • Country of origin
      Germany
    • Model
      M 2.1 AMP
    • Rms power
      420W
    • Description tag
      MATCH M 2.1AMP The M 2.1AMP is the ultimate compact powerhouse for 1-channel or 2-channel applications with limited installation space. Excellent sound quality
    • Title tag
      Match M 2.1 AMP Micro Compact Amplifier 2x210w 4-Ohm Stereo 430w

  • Satisfaction Guaranteed


    If you are not 100% satisfied, we are happy to exchange or refund the full price of the merchandise within 30 days of delivery. All returned items must be in as-new fully re-saleable condition in the original box and include all packaging material, manuals, and accessories.  We reserve the right to refuse an exchange or full refund if goods are not returned in as new re-saleable condition or are damaged. 

    Upon receipt of your order you are advised to carefully inspect the package and goods to ensure they are intact and complete. Should you find the parcel to be damaged or incomplete, please notify us within 24 hours. 

    If you believe your item is defective please notify us immediately so we can help troubleshoot and provide a replacement or warranty service (if applicable).  We will provide a return shipping label and a replacement will be sent after the defective item has been received and tested by our technician.

     

    Return/Exchange Process


    To request a return/exchange, please send us a message so we can assign a return merchandise authorization (RMA) number.  Customers are responsible for the return shipping costs unless the item(s) arrived damaged or defective. Please note that tracking is required for all packages returned back to us.

Featured Products

Free US shipping

available on all orders as standard

Learn More